Find the exact window film in the NFRC directory
The National Fenestration Rating Council, or NFRC, rates and certifies window film energy performance. Its applied-film directory is the place to look for a claimed product rating.
Start with the manufacturer and full product designation from the film’s current document. A brand may sell several films with similar names. Match the actual product before using any number.
- Open the matching product record.
Keep the manufacturer, full film name and Certified Products Directory (CPD) number together. Note whether the record identifies interior or exterior application.
- Read the glass description.
The “reference glazing” field tells you which glass the rating describes. Match the relevant configuration rather than choosing the lowest number in the table.
- Keep each number in its column.
Where the record shows “No Film” and “with Film,” retain those labels. Keep the glass description beside both figures.
- Save a usable reference.
Record the official link and the date you checked it. Reopen the record when using it for a later quote or specification.
Why can the same film have several ratings?
The official SGF-K-063 record for Hilite 70 (int) lists one film against several reference-glazing configurations. It includes U-factor and separate no-film/with-film values for solar heat gain coefficient and visible transmittance. Different rows describe different glazing, not different names for one universal result.
When preparing a comparison, use a simple set of headings in your notes: product, glass, metric, without film, with film and source. If the glass changes between two rows, write that down before drawing a conclusion.
The linked record is a reading example, not a recommendation to choose that film. Use the record for the product being considered and keep the manufacturer’s separate compatibility guidance with it.
What do the three main ratings tell you?
- U-factor
- Heat transfer through the rated product. Lower means less heat transfer. Keep the unit with the value.
- SHGC: solar heat gain coefficient
- Solar heat admitted by the rated glazing. Lower means less heat gain from the sun.
- VT: visible transmittance
- Visible light passing through. Higher means more daylight passes through the rated product.
The NFRC film-label fact sheet explains these fields and how reference glazing is identified. It is background reading, rather than a substitute for the current product record.
The right choice depends on the job. A customer may want less solar heat while retaining more daylight. Compare both SHGC and VT for the appropriate glazing instead of treating one low number as the whole answer. For more detail, read VLT, TSER and SHGC explained.
Keep the exact rating row with the job
| Rating-record field | What you found |
|---|---|
| Manufacturer and exact film | |
| CPD record number | |
| Interior or exterior designation | |
| Reference glazing and operator type | |
| SHGC without film / with film | / |
| VT without film / with film | / |
| U-factor and unit | |
| Official record link and date checked | |
| Actual building-glass details known | |
| Difference still requiring review |
Do not fill an unknown building detail with the reference-glass description. Keep the energy-performance extract separate from glass suitability, installation instructions and warranty terms.
An example of the arithmetic
Suppose an illustrative row has SHGC of 0.70 without film and 0.40 with film. The difference is 0.30; the relative decrease from 0.70 is about 43 percent. Neither statement means the building's electricity bill will fall by 43 percent.
These are invented figures for a calculation, not ratings for a named product. Keep a visible-light change labeled as a visible-light change too; do not rename it “glare eliminated.”
Sources: NFRC applied-film record SGF-K-019; NFRC Certified Products Directory.
What if you cannot find the claimed rating?
Check spelling, manufacturer and the complete product designation. Then ask the manufacturer for the applicable CPD number and official record. A failed search alone does not prove that a product has no record; it means the match is still unresolved.
Use an NFRC rating for the energy-performance question it answers. It does not establish installer certification, a particular window’s film compatibility, warranty coverage or security performance. Resolve those questions with the appropriate product documents and responsible provider.
If the manufacturer’s sheet and directory appear to disagree, keep both documents and ask about the product version, glass and rating basis. Do not silently select the more favorable number.
Sources & scope
These primary sources support the limited descriptions above. Standards summaries use public scope information, not the full licensed text.
- NFRC: window film energy ratingsDescribes independent energy-performance certification and directs readers to product labels and records; not a glass-compatibility or installer-certification record.Source checked . This is our check date, not a publication date.
- NFRC applied-film directoryManufacturer-first film-attachment search. No product rating is reproduced here.Source checked . This is our check date, not a publication date.
- NFRC record SGF-K-063: directory structure exampleUsed only to illustrate a record’s configuration fields, not to recommend a product or reproduce its results.Source checked . This is our check date, not a publication date.
- NFRC film-program fact sheetProgram and attachment-label background. Publication date unconfirmed; this is not a current procedure manual.Source checked . This is our check date, not a publication date.